Couteaux de chasse : fiabilité et résistance en pleine nature

COUTEAU PROVENANT D'UNE COLLECTION PRIVÉE
* Type : Acheté précédemment 
* Condition : Très bon état
* Affûtage : Original
* Marques sur la lame : Aucune
* Marques sur la poignée : Aucune
* Emballage : -
* Fourreau : original, en cuir, en très bon état
* Manuels, certificats et garanties : - - * Vérifié et certifié par notre laboratoire interne.
* Contrôlé et certifié par notre laboratoire interne.

Le Randall Model 1 Fighter fut l'un des premiers modèles produits dans l'atelier de Randall à Orlando. Un modèle 1, fabriqué par Bo Randall lui-même, a servi de prototype au Springfield Randall qui a été produit par la Northampton Cutlery Company près de Springfield, Massachusetts, en 1943 et 1944 pour l'armée américaine.

Utilisation prévue : tactique / militaire

Type de fabrication : artisanal
Pays de fabrication : USA
Lame : pleine soie en acier inoxydable 440B
Finition de la lame : finition satinée
Manche : garde traversante en laiton et manche en micarta monolithique
Longueur de la lame : 177 mm.
Epaisseur de la lame : 5mm.
Longueur totale : 295 mm.
Équilibre : sur la branche de garde
Poids : 350g.
Fourreau : ceinture, cuir noir
Notes : couteau acheté précédemment, retiré d'une collection privée.

Utilisation prévue : Collecte / Extérieur

Lame : Pleine soie en acier inoxydable N680 à 57/58HRC
Manche : En métal
Longueur de la lame : 170 mm.
Épaisseur de la lame : 5 mm.
Longueur totale : 295 mm.
Poids : 367g.
Gaine : en polymères et cordura avec les accessoires suivants :

* Skinner
* Pierre à aiguiser
* le kit de survie comprend :
- Nécessaire de pêche
- Kit de couture
- Scalpel
- Assaisonnements
- Brucelles

Emballage : carton avec logos Aitor

Utilisation prévue: Collection / Utility

Type de production: Industriel
Pays de production: Taiwan
Lame: en acier D2
Finition de la lame: sablée
Poignée: G10
Longueur de lame: 173 mm.
Épaisseur de lame: 5 mm.
Longueur totale: 324 mm.
Poids: 459 g.
Gaine: en cuir noir
Emballage: boîte cadeau avec certificat de garantie et chiffon de nettoyage en microfibre
Notes: Édition limitée et numérotée de 1999 exemplaires - Design by Dietmar Pohl (Pohl Force)

machette

Usage prévu: sport

Type de production: industrielle
Lame: pleine soie en acier inoxydable 440
Traitement de la lame: -
Production de Lama: Espagne
Poignée: bois
Longueur de la lame: 170mm.
Épaisseur de la lame: 5mm.
Longueur fermée: -
Longueur totale: 35mm.
Équilibrage: -
Poids: 638g.
Fermeture: -
Clip: -
Gaine: cuir
Note: production de la fin des années 90 "

Collini Cutlery est le distributeur officiel pour l'Italie des couteaux White River Knife & Tool

Conçu pour une utilisation intensive dans des situations de survie réelles, ce couteau est également excellent pour une utilisation en extérieur et pour la chasse.

Utilisation prévue: Chasse / Sports

Type de production: Artisan
Production de lame: USA
Lame: acier inoxydable CPM-S35VN 58 / 60HRC
Traitement de la lame: -
Poignée: micarta
Longueur de lame: 175
Épaisseur de lame: 5 mm.
Longueur fermée: -
Longueur totale: 295 mm.
Épais lorsqu'il est fermé: -
Équilibrage: 0,5 cm avancé
Poids: 320 g.
Fermeture: -
Clip: -
Gaine: cuir
Emballage: Boîte en bois avec logos WRKT
Remarques: silex logé dans une poche de fourreau
Invia commenti
Cronologia
Salvate
Community

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Dalla collaborazione tra lo scrittore Nicolai Lilin e Coltellerie Maserin è nato il 987 Siberian Knife. Coltello dalle forme tipicamente siberiane, ha lama e fodero con disegni che riprendono temi e simbologie della tradizione di questa terra fredda e ancora in gran parte misteriosa; elementi presenti anche nelle opere figurative e nei tatuaggi realizzati dall'autore del libro best seller Educazione Siberiana, diventato poi grande successo cinematografico grazie alla sapiente regia di Gabriele Salvatores

Destinazione d'uso: Caccia/Sportivo/Collezione

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 170mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 293mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 288g.
Chiusura: -
Clip: -
Fodero: Cuoio
Confezione: Scatola di cartone
Note: Kolima Design by Nicolai Lilin